How to clean a juicer?

When you are finished juicing, turn the juicer lid counterclockwise to the OPEN mark.

Rinse the cover with warm water and/or a sponge and detergent and leave it to dry.

Remove the screw, sieve and sieve cleaner from the juicing bowl.

Rinse all parts thoroughly with warm water, and clean and brush the sieve thoroughly with the included sieve brush.

When you have rinsed the juicer, move the silicone (silicone door) at the bottom of the pulp outlet so that you can rinse out any remaining pulp using the brush provided. After cleaning, put the silicone back in place, otherwise you will not be able to reassemble the juicer.

Once you have cleaned all the parts, leave them to dry.

The entire cleaning process takes 2-5 minutes.

It is important to note that the cleaner your juicer is, the more efficient it will be and the better the juicing results will be. Try to keep pulp from accumulating on the parts of your juicer.

According to the manufacturer's instructions, the upper parts of the juicer, which are attached to the device, can be soaked overnight in water with vinegar.

If the parts have been stained by food, according to the manufacturer's instructions included with the appliance, you can take a cotton swab soaked in vegetable oil and use it to go over the stale food stains on the drum.